Bullet Resistant Vest |
||
---|---|---|
| ||
NIJ 0101.04 and NIJ 0101.06 test bullet comparison
|
NIJ 0101.04 | NIJ 0101.06 | Remarks | |
---|---|---|---|---|
Level | Test bullet | Test velocity (ft/s) |
||
IIA | 9 mm FMJ RN | 1120±30 ft/s | 1225±30 ft/s | Higher velocity: +105 |
.40 cal. S&W FMJ | 1055±30 ft/s | 1155±30 ft/s | Higher velocity: +100 | |
II | 9 mm FMJ RN | 1205±30 ft/s | 1305±30 ft/s | Higher velocity: +100 |
.357 Mag. JSP | 1430±30 ft/s | 1430±30 ft/s | N/A | |
IIIA | 9 mm FMJ RN | 1430±30 ft/s | N/A | Different test rounds |
.357 SIG FMJ FN | N/A | 1470±30 ft/s | ||
.44 Mag. JHP | 1430±30 ft/s | N/A | ||
.44 Mag. SJHP | N/A | 1430±30 ft/s |
NIJ 0101.04 and NIJ 0101.06 requirement comparison
Level IIA- IIIA
Requirements | NIJ 0101.04 | NIJ 0101.06 | Remarks |
---|---|---|---|
Panel samples required | 6 | 28 (22 large and 6 small) |
More samples and different size of samples required |
Shot-to-shot distance | 2” min | Shots 1-3: 2” min, |
New requirements: Shots 4-6 should be located within a 3.94” diameter circle. |
Shot-to-edge distance | 3” min | 2” min | Shot closer to the edge |
Wet testing | 6 min spray | 30 min full immersion | Longer and full immersion in the water |
Baseline ballistic limit determination test | 9 mm 124 gr. FMJ |
Two test rounds |
More shots needed |
Tumbling test | N/A | test duration: 10 d ± 1 h |
New requirement |